GaN Epitaxial Wafers
4-inch Epitaxial GaN-on-Si HEMT Wafer
AGSH4C26GA by Agnit Semiconductors
The AGSH4C26GA from Agnit Semiconductors is a 4-inch MOCVD-grown epitaxial GaN-on-Si HEMT wafer for power switching; high-voltage gan devices for power conversion. Its material-characteristics table specifies sheet resistance ≤500 Ω/sq, sheet carrier density ≥9 × 10^12 cm^-2 and electron mobility ≥1600 cm²/Vs. The wafer uses p-type Si (111). Layer materials, grouped thickness values and wafer dimensions are retained in the specifications below. RF applicability statements are not an operating-frequency rating. Source: Agnit AGSH4C26GA datasheet, Version 2.0 December 2024, pages 1–3.
Specifications
| Parameter | Min | Typ | Max | Unit | Value / Conditions |
|---|---|---|---|---|---|
| Material / substrate | — | — | — | — | GaN-on-Si; p-type Si (111) |
| Nominal wafer diameter | — | — | — | inch | 4-inch nominal |
| Sheet resistance | — | — | — | Ω/sq | ≤500 Ω/sq |
| Sheet carrier density | — | — | — | cm^-2 | ≥9 × 10^12 cm^-2 |
| Electron mobility | — | — | — | cm²/Vs | ≥1600 cm²/Vs |
| Wafer bow | — | — | — | µm | ≤±20 µm (source notation) |
| GaN FWHM (002) | — | — | — | arc secs | ≤600 arc secs; (002) |
| GaN FWHM (102 / 103) | — | — | — | arc secs | ≤900 arc secs; (102) |
| Surface roughness | — | — | — | nm | ≤0.4 nm |
| Buffer breakdown | — | — | — | V | Not specified as a buffer-breakdown table rating. |
| Cap layer | — | — | — | — | GaN; 2 ± 1 nm; thickness can be modified on request up to 5 nm. |
| Barrier layer | — | — | — | — | Al₀.₂₆Ga₀.₇₄N; 18 ± 1 nm; barrier thickness can be modified on request. |
| Interlayer / spacer | — | — | — | — | Without spacer (introductory description). |
| Channel / buffer / nucleation stack | — | — | — | — | GaN channel → C:doped GaN buffer → AlN nucleation; Table 2 shared thickness cell: 2 ± 0.1 µm across these rows; thickness and dopant can be modified on request. |
| Strain relief layers | — | — | — | — | Not separately specified. |
| Substrate thickness | — | — | — | — | 1 mm ± 25 µm (source mixed-unit notation) |
| Wafer dimensions / flats | — | — | — | — | Diameter 100 ± 0.5 mm; primary flat shown, length not specified. |
| Source-supported features | — | — | — | — | Device and material quality and uniformity; reduced wafer warpage for 4-inch tool compatibility; supports a 900 V breakdown voltage for GaN devices (feature statement, no test condition specified). |
| Source-supported applications | — | — | — | — | Power switching; high-voltage GaN devices for power conversion |
| Source notes | — | — | — | — | Table 1 uses inclusive limits (≤ / ≥), while introductory prose uses less than / greater than; Table 1 limits are retained. No RF operating-frequency range is specified. Shared Table 2 thickness cells are retained as grouped stack values, without assigning a separate thickness to each layer. The 900 V statement appears in Features, not as a condition-qualified buffer-breakdown table entry. |
| Datasheet revision | — | — | — | — | Version 2.0 December 2024; pages 1–3 |
Applications
Technology
Taxonomy
Package: Epitaxial wafer
Similar products
GaN Epitaxial Wafers · Agnit Semiconductors
2-inch Epitaxial GaN-on-sapphire HEMT Wafer
AGAH2C100S
The AGAH2C100S from Agnit Semiconductors is a 2-inch MOCVD-grown epitaxial GaN-on-sapphire HEMT wafer for high-frequency rf devices; strategic and telecommunication applications. Its material-characteristics table specifies sheet resistance ≤400 Ω/sq, sheet carrier density ≥2 × 10^13 cm^-2 and electron mobility ≥600 cm²/Vs. The wafer uses 2-inch c-plane sapphire SSP. Layer materials, grouped thickness values and wafer dimensions are retained in the specifications below. RF applicability statements are not an operating-frequency rating. Source: Agnit AGAH2C100S datasheet, Version 2.0 December 2024, pages 1–3.
GaN Epitaxial Wafers · Agnit Semiconductors
2-inch Epitaxial GaN-on-sapphire HEMT Wafer
AGAH2C25S
The AGAH2C25S from Agnit Semiconductors is a 2-inch MOCVD-grown epitaxial GaN-on-sapphire HEMT wafer for high-frequency rf devices; strategic and telecommunication applications. Its material-characteristics table specifies sheet resistance ≤400 Ω/sq, sheet carrier density ≥9 × 10^12 cm^-2 and electron mobility ≥1700 cm²/Vs. The wafer uses 2-inch c-plane sapphire SSP. Layer materials, grouped thickness values and wafer dimensions are retained in the specifications below. RF applicability statements are not an operating-frequency rating. Source: Agnit AGAH2C25S datasheet, Version 2.0 December 2024, pages 1–3.
GaN Epitaxial Wafers · Agnit Semiconductors
2-inch Epitaxial GaN-on-Si HEMT Wafer
AGSH2C25SA
The AGSH2C25SA from Agnit Semiconductors is a 2-inch MOCVD-grown epitaxial GaN-on-Si HEMT wafer for power switching; rf devices across vhf to x-band; strategic and telecommunication applications. Its material-characteristics table specifies sheet resistance ≤500 Ω/sq, sheet carrier density ≥7 × 10^12 cm^-2 and electron mobility ≥1600 cm²/Vs. The wafer uses p-type Si (111). Layer materials, grouped thickness values and wafer dimensions are retained in the specifications below. RF applicability statements are not an operating-frequency rating. Source: Agnit AGSH2C25SA datasheet, Version 2.0 December 2024, pages 1–3.